RGBLINK(1)

NAME
rgblink - Game Boy linker

SYNOPSIS
rgblink [-dhMtVvwx] [-B param] [--color when] [-l linker_script] [-m map_file] [-n sym_file] [-O overlay_file] [-o out_file] [-p pad_value] [-S spec] [-W warning] file ...

DESCRIPTION
The rgblink program links RGB object files, typically created by rgbasm(1), into a single Game Boy ROM file. The object file format is documented in rgbds(5).

ROM0 sections are placed in the first 16 KiB of the output ROM, and ROMX sections are placed in any 16 KiB “bank” except the first. If your ROM will only be 32 KiB, you can use the -t option to change this.

Similarly, WRAM0 sections are placed in the first 4 KiB of WRAM (“bank 0”), and WRAMX sections are placed in any bank of the last 4 KiB. If your ROM doesn't use banked WRAM, you can use the -w option to change this.

Also, if your ROM is designed for a monochrome Game Boy, you can make sure that you don't use any incompatible section by using the -d option, which implies -w but also prohibits the use of banked VRAM.

ARGUMENTS
rgblink accepts the usual short and long options, such as -V and --version. Options later in the command line override those set earlier, except for when duplicate options are considered an error. Options can be abbreviated as long as the abbreviation is unambiguous: --verb is --verbose, but --ver is invalid because it could also be --version.

Unless otherwise noted, passing ‘-’ (a single dash) as a file name makes rgblink use standard input (for input files) or standard output (for output files). To suppress this behavior, and open a file in the current directory actually called ‘-’, pass ‘./-’ instead. Using standard input or output for more than one file in a single command may produce unexpected results.

rgblink accepts decimal, hexadecimal, octal, and binary for numeric option arguments. Decimal numbers are written as usual; hexadecimal numbers must be prefixed with either ‘$’ or ‘0x’; octal numbers must be prefixed with either ‘&’ or ‘0o’; and binary numbers must be prefixed with either ‘%’ or ‘0b’. (The prefixes ‘$’ and ‘&’ will likely need escaping or quoting to avoid being interpreted by the shell.) Leading zeros (after the base prefix, if any) are accepted, and letters are not case-sensitive. For example, all of these are equivalent: ‘42’, ‘042’, ‘0x2A’, ‘0X2A’, ‘0x2a’, ‘&52’, ‘0o52’, ‘0O052’, ‘0b00101010’, ‘0B101010’.

The following options are accepted:

-B param, --backtrace param
    Configures how location backtraces are printed if warnings or errors occur. This flag may be specified multiple times with different parameters that combine meaningfully. If param is a positive number, it specifies the maximum backtrace depth, abbreviating deeper ones. Other valid parameter values are the following:

    0   Do not limit the maximum backtrace depth; this is the default.

    all Force all locations to be printed, even "quiet" ones (see “Excluding locations from backtraces” in rgbasm(5) for details).

    no-all
        Do not print "quieted" locations in backtraces; this is the default.

    collapse
        Print all locations on one line.

    no-collapse
        Print one location per line; this is the default.

--color when
    Specify when to highlight warning and error messages with color: ‘always’, ‘never’, or ‘auto’. ‘auto’ determines whether to use colors based on the ‘NO_COLOR: https://no-color.org/’ or ‘FORCE_COLOR: https://force-color.org/’ environment variables, or whether the output is to a TTY.

-d, --dmg
    Enable DMG mode. Prohibit the use of sections that doesn't exist on a DMG, such as VRAM bank 1. This option automatically enables -w.

-h, --help
    Print help text for the program and exit.

-l linker_script, --linkerscript linker_script
    Specify a linker script file that tells the linker how sections must be placed in the ROM. The attributes assigned in the linker script must be consistent with any assigned in the code. See rgblink(5) for more information about the linker script format.

-M, --no-sym-in-map
    If specified, the map file will not list symbols, only sections.

-m map_file, --map map_file
    Write a map file to the given filename, listing how sections and symbols were assigned.

-n sym_file, --sym sym_file
    Write a symbol file to the given filename, listing all visible labels and exported numeric constants. Labels output their bank and address, numeric constants output their value, following this specification: https://rgbds.gbdev.io/sym/. Several external programs can use this information, for example to help debugging ROMs.

-O overlay_file, --overlay overlay_file
    If specified, sections will be overlaid "on top" of the ROM image overlay_file: empty space between sections will be filled by the corresponding bytes from overlay_file. This is useful to patch an existing ROM. Note that all sections must be fixed (forced bank and address)!

-o out_file, --output out_file
    Write the ROM image to the given file.

-p pad_value, --pad pad_value
    When inserting padding between sections, pad with this value. The default is 0.

-S spec, --scramble spec
    Enables a different “scrambling” algorithm for placing sections. See Scrambling algorithm below for an explanation and a description of spec.

-t, --tiny
    Expand the ROM0 section size from 16 KiB to the full 32 KiB assigned to ROM. ROMX sections that are fixed to a bank other than 1 become errors, other ROMX sections are treated as ROM0. Useful for ROMs that fit in 32 KiB.

-V, --version
    Print the version of the program and exit.

-v, --verbose
    Be verbose. The verbosity level is increased by one each time the flag is specified, with each level including the previous:
    1.  Print the rgblink configuration before taking actions.
    2.  Print a notice before significant actions.
    3.  Print some of the actions' intermediate results.
    4.  Print some internal debug information.
    5.  Print detailed internal information.
    The verbosity level does not go past 6.

    Note that verbose output is only intended to be consumed by humans, and may change without notice between RGBDS releases; relying on those for scripts is not advised.

-W warning, --warning warning
    Set warning flag warning. A warning message will be printed if warning is an unknown warning flag. See the DIAGNOSTICS section for a list of warnings.

-w, --wramx
    Expand the WRAM0 section size from 4 KiB to the full 8 KiB assigned to WRAM. WRAMX sections that are fixed to a bank other than 1 become errors, other WRAMX sections are treated as WRAM0.

-x, --nopad
    Disables padding the end of the final file. This option automatically enables -t. You can use this to make binary files that are not a ROM. When making a ROM, note that not using this is not a replacement for rgbfix(1)'s -p option!

@at_file
    Read more options and arguments from a file, as if its contents were given on the command line. Arguments are separated by whitespace or newlines. Lines starting with a hash sign (‘#’) are considered comments and ignored.

    No shell processing is performed, such as wildcard or variable expansion. There is no support for escaping or quoting whitespace to be included in arguments. The standard ‘--’ to stop option processing also disables at-file processing. Note that while ‘--’ can be used inside an at-file, it only disables option processing within that at-file, and processing continues in the parent scope.

  Scrambling algorithm
The default section placement algorithm tries to place sections into as few banks as possible. (It turns out that section placement is an NP-complete problem known as "bin packing", so rgblink does not attempt to find the optimal solution, but instead uses a "first-fit" heuristic to find a good one in a reasonable amount of time.) There are no guarantees about where this algorithm will place sections, apart from the bank, address, and alignment constraints manually specified for the sections.

“Scrambling” instead places sections into a given pool of banks, trying to minimize the number of sections sharing a given bank. This is useful to catch broken bank assumptions, such as expecting two different sections to land in the same bank (that is not guaranteed unless both are manually assigned the same bank number). There are still no guarantees about where this algorithm will place sections, apart from the bank pool size and any manually specified section constraints.

A scrambling spec is a comma-separated list of region specs. A trailing comma is allowed, as well as whitespace between all specs and their components. Each region spec has the following form:
    region[=size]
region specifies the section type, and size specifies the number of banks in the pool for that section type. region must be one of the following (case-insensitive), while size must be a positive decimal integer between 1 and the corresponding maximum. Certain regions allow omitting the size, in which case it defaults to its maximum value.
Region name Ta Max size Ta Size optional romx | 65535 | sram | 255 | wramx | 7 | Yes

A size of 0 disables scrambling for that region.

For example, ‘romx=64,wramx,sram=4’ will scramble ROMX sections among ROM banks 1 to 64, WRAMX sections among RAM banks 1 to 7, and SRAM sections among SRAM banks 0 to 3.

Later region specs override earlier ones; for example, ‘romx=42, Romx=0’ disables scrambling for romx.

wramx scrambling is silently ignored if -w is passed (including if implied by -d), as WRAMX sections will be treated as WRAM0.

DIAGNOSTICS
Warnings are diagnostic messages that indicate possibly erroneous behavior that does not necessarily compromise the linking process. The following options alter the way warnings are processed.

-Werror
    Make all warnings into errors. This can be negated as -Wno-error to prevent turning all warnings into errors.

-Werror=
    Make the specified warning or meta warning into an error. A warning's name is appended (example: -Werror=obsolete), and this warning is implicitly enabled and turned into an error. This can be negated as -Wno-error= to prevent turning a specified warning into an error, even if -Werror is in effect.

The following warnings are “meta” warnings, that enable a collection of other warnings. If a specific warning is toggled via a meta flag and a specific one, the more specific one takes priority. The position on the command-line acts as a tie breaker, the last one taking effect.

-Wall
    This enables warnings that are likely to indicate an error or undesired behavior, and that can easily be fixed.

-Weverything
    Enables literally every warning.

The following warnings are actual warning flags; with each description, the corresponding warning flag is included. Note that each of these flags also has a negation (for example, -Wobsolete enables the warning that -Wno-obsolete disables; and -Wall enables every warning that -Wno-all disables). Only the non-default flag is listed here. Ignoring the “no-” prefix, entries are listed alphabetically.

-Wno-assert
    Warn when WARN-type assertions fail. (See “Aborting the assembly process” in rgbasm(5) for ASSERT).

-Wdiv
    Warn when dividing the smallest negative integer (-2**31) by -1, which yields itself due to integer overflow. This warning is enabled by -Wall.

-Wno-large-constant
    Warn when a constant too large to fit in a signed 32-bit integer is encountered.

-Wno-obsolete
    Warn when obsolete features are encountered, which have been deprecated and may later be removed.

-Wshift
    Warn when shifting right a negative value. Use a division by 2**N instead. This warning is enabled by -Wall.

-Wshift-amount
    Warn when a shift's operand is negative or greater than 32. This warning is enabled by -Wall.

-Wtruncation=
    Warn when an implicit truncation (for example, db to an 8-bit value) loses some bits. -Wtruncation=0 or -Wno-truncation disables this warning. -Wtruncation=1 or just -Wtruncation warns when an N-bit value is 2**N or greater, or less than -2**N. -Wtruncation=2 also warns when an N-bit value is less than -2**(N-1), which will not fit in two's complement encoding.

EXAMPLES
All you need for a basic ROM is an object file, which can be made into a ROM image like so:

    $ rgblink -o bar.gb foo.o

The resulting bar.gb will not have correct checksums (unless you put them in the assembly source). You should use rgbfix(1) to fix these so that the program will actually run in a Game Boy:

    $ rgbfix -v bar.gb

Here is a more complete example:

    $ rgblink -o bin/game.gb -n bin/game.sym -p 0xFF obj/title.o obj/engine.o

BUGS
Please report bugs or mistakes in this documentation on GitHub: https://github.com/gbdev/rgbds/issues.

SEE ALSO
rgbasm(1), rgblink(5), rgbfix(1), rgbgfx(1), gbz80(7), rgbds(5), rgbds(7)

HISTORY
rgblink was originally written by Carsten Sørensen as part of the ASMotor package, and was later repackaged in RGBDS by Justin Lloyd. It is now maintained by a number of contributors at https://github.com/gbdev/rgbds.