# Only the system vendor should modify this file, ordinary users
# should not have to change anything.

[UPower]

# Enable the Watts Up Pro device.
#
# The Watts Up Pro contains a generic FTDI USB device without a specific
# vendor and product ID. When we probe for WUP devices, we can cause
# the user to get a perplexing "Device or resource busy" error when
# attempting to use their non-WUP device.
#
# The generic FTDI device is known to also be used on:
#
# - Sparkfun FT232 breakout board
# - Parallax Propeller
#
# default=false
EnableWattsUpPro=false

# Don't poll the kernel for battery level changes.
#
# Some hardware will send us battery level changes through
# events, rather than us having to poll for it. This option
# allows disabling polling for hardware that sends out events.
#
# default=false
NoPollBatteries=false

# Do we ignore the lid state
#
# Some laptops are broken. The lid state is either inverted, or stuck
# on or off. We can't do much to fix these problems, but this is a way
# for users to make the laptop panel vanish, a state that might be used
# by a couple of user-space daemons. On Linux systems, see also
# logind.conf(5).
#
# default=false
IgnoreLid=false

# Policy for warnings and action based on battery levels
#
# Whether battery percentage based policy should be used. The default
# is to use the time left, change to true to use the percentage, which
# should work around broken firmwares. It is also more reliable than
# the time left (frantically saving all your files is going to use more
# battery than letting it rest for example).
# default=true
UsePercentageForPolicy=true

# When UsePercentageForPolicy is true, the levels at which UPower will
# consider the battery low, critical, or take action for the critical
# battery level.
#
# This will also be used for batteries which don't have time information
# such as that of peripherals.
#
# If any value is invalid, or not in descending order, the defaults
# will be used.
#
# Defaults:
# PercentageLow=20.0
# PercentageCritical=5.0
# PercentageAction=2.0
PercentageLow=20.0
PercentageCritical=5.0
PercentageAction=2.0

# When UsePercentageForPolicy is false, the time remaining in seconds at
# which UPower will consider the battery low, critical, or take action for
# the critical battery level.
#
# If any value is invalid, or not in descending order, the defaults
# will be used.
#
# Defaults:
# TimeLow=1200
# TimeCritical=300
# TimeAction=120
TimeLow=1200
TimeCritical=300
TimeAction=120

# Enable the risky CriticalPowerAction-Suspend
# This option is not recommended, but it is here for users who
# want to enable the risky CriticalPowerAction, such as "Suspend"
# to fulfill their needs.
# Default is false
AllowRiskyCriticalPowerAction=false

# If the user performs the battery recalibration, the battery behavior
# will be set to "force discharge" and the user expects the battery will
# be fully discharged. However, upower performs the
# CriticalPowerAction earlier than the battery was fully discharged.
# ExpectBatteryRecalibration allows upower to ignore the
# CriticalPowerAction when the user attempts to perform the battery recalibration.
# Default is false
ExpectBatteryRecalibration=false

# The action to take when "TimeAction" or "PercentageAction" above has been
# reached for the batteries (UPS or laptop batteries) supplying the computer
#
# Possible values are:
# PowerOff
# Hibernate
# HybridSleep
# Auto (The CriticalPowerAction will be determined by the system)
# Suspend (AllowRiskyCriticalPowerAction should be true to use this option but risky)
# Ignore (AllowRiskyCriticalPowerAction should be true to use this option but risky)
#
# If Suspend isn't available or AllowRiskyCriticalPowerAction=false, HybridSleep will be used
# If HybridSleep isn't available, Hibernate will be used
# If Hibernate isn't available, PowerOff will be used
CriticalPowerAction=Auto
